Gonna go smaller on my injectors, Wich Ones ?

[proflow]

I recently purchased a 5er that when loaded is probably about 16k. This weekend was the first trip out & I was fighting the pyro most the way. In the hills anyway. My current set up is Edge Hot Comp box, DD3's, Catcher ECU, HX-40,4'' exhaust w/5'' stacks, DTT trans w/ 410 gears. 285/17'' tires. I ran w/ the box off & was still seeing up to 1300 at times with my foot barely in it . Mostly 1200 in the hills in 3rd but barely touching the fuel. I did the variations in gear/rpm thing & pending traffic that worked best but still not good enough. So heres the deal, Im thinking of either putting my stock injectors back in & run my box on 5-5 daily. (usually on 3-5) Or preferably a better injector than stock but has to be able to pull heavy with my other mods. Ive been out of the injector loop for awhile & understand some advancements may have been made. After searching a bit the F1 EDM 1. 6's seem to be talked of alot. Still dont know if thats too hot with the rest or not though. Any help guys would be great ! Thanks--Proflow

 

[onestackdram]

Look at F-1 Diesel Mach 1. 8's from Don M. They are meant for your type of application.

 

[proflow]

Cool, I spoke with Bob Wagner about the 1. 6's. Seems like the way to go. Im guessing the difference here is hp level. Thanks--Proflow