Attention: TDR Forum Junkies 
Just poking around under the hood today. I noticed an A/C compressor suction line by the oil filter (with the low pressure c/o switch) which comes up between the Turbo discharge to the cooler flex hose and a small coolant line from the back of the water pump discharge housing. The A/C line was leaning on the flex hose clamp, so I straightened it and centered it between the two previously mentioned items. I then noticed the line had wore a bit due to vibration against the hose calmp . 
In an effort to prolong the inevitable I sliced a piece of hose and slid it on the line, wire tying it above and below the low pressure c/o switch to hold it in place.
Take a look and see if your's is the same - whether it is or not you might want to add a piece of hose as a dampener - cheap insurance
Anyone ever have to replace the line I'm describing? If so how much????
In an effort to prolong the inevitable I sliced a piece of hose and slid it on the line, wire tying it above and below the low pressure c/o switch to hold it in place.
Take a look and see if your's is the same - whether it is or not you might want to add a piece of hose as a dampener - cheap insurance
Anyone ever have to replace the line I'm describing? If so how much????
