Grill inserts for '02 Sport ?

[damon]

Who makes grill inserts for the 2nd gen Sport models ?



I have searched the forums and found very little info. I am really hoping for a billet grill for my truck, but would entertain other styles as well. I don't need to worry about cold weather here, but want to use a grill insert to protect the radiator/coolers and for cool looks of course. I have found many for the non sport models, and some for the pre-99 sports, but I am pretty sure that the grill changed from 99 - 00 on the sports.



Thanks

 

[Dkevdog]

I may be wrong but I think that Street Scene makes something that will fit the Sport.



Did you try searching at Summit ?



Kev

 

[damon]

thanks Kev, once I went to StreetScene's site I found out that they are within 1/2 mile from where I work, looks like the wallet will be lighter after lunch

 

[sdriv]

grill inserts

damon!

I got the stull billet grilles from genos. Awsome looking excellent quality Check them out if you haven't purchased yet!! I see in your signature that you have an EZ with stock auto... How is it holding up? I was thinking of adding an EZ but wanted to hear from someone with experience with it!!

 

[damon]

8000 miles now and so far so good with the EZ and stock auto. Before I bought the EZ, I asked the same question and got mixed responses. I think that the bottom line is if you got a good transmission from the factory, then it should hold with just an EZ. I am careful with keeping the RPM's up to keep pressures high, and I use OD only above 55, so I am hoping that it will hold up until I get a modified VB and TC and maybe a smart controller. It's only one big credit card charge away.....



Thanks for the tip on Geno's. I found them there this morning and they look nice. Did you have to cut the stock honeycomb out ?

 

[sdriv]

grill inserts

Damon!!

Thanks for the trans input!! I think I will get one and see how I like it!! Yes I did have to remove the honeycomb grill. No problem though Just used a cordless drill with a 1/2" bit and removed the plastic tabs from the backside. The bumper inserts were a little tricky have to do some precise measuring so that they line up with each other when you are standing in front at a distance. Good luck!!!