Guages

[Archive]

Well, I just reloicated my guages and added a tach. I went with the Banks pod that goes on the dash and I hate it! Does anyone have this setup without the ugly wire loom that hangs out the bottom of the pod assembly and is visable on the dash? I am considering removing the dash and drilling a hole to rout all the wires to make this better looking but I wanted to hear if anyone else had some suggestions. I am tired of looking down to see where my EGT is when I'm pulling a grade. I would greatly appreciate any suggestions.

91 w350 banks turbo,exhaust,K&N filter,preluber, B&D injectors, pump timed at 1. 44mm, power lock diff, custom overload and springs, snug top shell, waiting to install power wagon injectors.

 

[Archive]

Patrick, I just installed a set of Isspro gauges (Pyro+Boost). Mine are on the post. I am very pleased, all the wires and boost tube are completely hidden. In order to hide the wires I drilled a hole through the plastic trim so wires come up under the gauge mount.
---
Al

------------------
92-LE,Cummins,Tach,4x4,5spd,3. 54,Borgeson steering shaft,Pyro & Boost, 16cm2

 

[Archive]

Al, did you do the work or have it done? How do you like the Isspro gauges?
Gary

------------------
'92 W250 LE 4x4, NV4500 5spd, Borgeson steering shaft, PrimeLoc

 

[Archive]

Gary, VDO vision series would be better for ya. Check out www.egauges.com

 

[Archive]

Gary, I picked up the gauges from BD in Abbotsford. I installed them myself, actually I found it quite simple. I tapped into fuse block number 14 which alows for dimming all of the gauges. The pyro has the green, yellow and red colour indicators along with the numbers. The pyro sure reacts when you step on the go pedal. So far I am very happy with them, but I only installed them last Saturday.

 

[Archive]

Pat, I have Isspro gauges in the Banks pod too. I used a neato net type sheathing I found at my job. Yes it does go down the outside of the dash, but it's neat. I hate to make holes in dashes and stuff! I love my Isspro gauges, though I had a sticky needle in my first boost gauge. I bought from Diesel Injection Service in TX. They replaced it no problem.

------------------
'92 W250,3. 54,auto,reg cab, raven hi top cap, tach,boost,transtemp,pyro. 16cm housing.

 

[Archive]

Pat consider building your own gauge housing. I have one on my dash,it has 8 guages mounted in it. One of these days I'll figure out how to include a picture with a post.
Gene
92 350 4x4