H.O. stock/BOMBed dyno #'s anyone?

[joesoot]

No I don't have any #'s to show. Please post or email your stock and or BOMBed graph if you have one. Would love to see some stock #'s though.
I've been floating around on vendor sites, lookin' at HO #'s all evening. From 4 sites that seemed to have had semi-unmanipulated graphs, I came with an average of about 223HP
about a few ticks over 2600 revs. Figuring an approximate 15% parasitic loss thru the drivetrain, the flywheel average comes out a little over 260HP. Are these trucks under-rated or does the 6er really put mucho power to the ground?

 

[Charles Wheeler]

I don't have the graph, but my truck dynoed at 213HP stock (See Sig). That was with less than 10K on the odometer. Maybe if I can get time to get the scaner hooked up I'll post a scan of the dyno chart.


------------------
2K1 3500 4x4 SLT+ QC ETH/DEE, silencer ring AWOL, Isspro hour meter, Line-x liner, EGT, and boost gauges.
213HP @ 2500, 470 ft-lb @ 2200
Soon to come: BOMBing stuff

 

[Bigsaint]

Did a quick search, here's some numbers.

Scott W.

https://www.turbodieselregister.com/ubb//Forum3/HTML/002459.html
https://www.turbodieselregister.com/ubb//Forum3/HTML/002713.html
https://www.turbodieselregister.com/ubb//Forum3/HTML/002573.html

 

[CUMINNTSTRKN]

here is my corrected #'s with and with out my ez.
#ad

this is with my dd2's and ez

#ad


jim

------------------
2001 eth, ez box, dd2's

[This message has been edited by CUMINNTSTRKN (edited 03-07-2001). ]

 

[Evan A. Beck]

Here's my numbers:

234/489, stock with straight pipe and K&N.

350/800, with DD3's, PSA, and straight pipe. Clutch was slipping a bit too.