2nd Gen Non-Engine/Transmission Hazard light's not working

[olebum]

Thanks every for the help with my cruise control problem. I replaced the

stop light switch and now the cruise control will cut off when the brake is touched. Thanks again. I now need your help in fixing the hazard lights.



The turning signals work fine but when I push with the hazard switch down, neither of them work. Is the hazards and turning signals on the same flasher unit? I am sure someone out there will set me straight.



The forum on the Tutbo Diesel Registry has saved me many of hundred,s of dollars. / I don't see how anybody with a Dodge Diesel could do without it.



Thanks again for always helping. Oo. Oo.

 

[Camelracer]

The turn signals and 4 way have separate flasher units. They are located in the fuse panel on the side of the dash.

 

[olebum]

Hazard's or 4 ways not Working.

I have looked in my fuse area but find only one large blue flasher. that activates when the turning signals are working. I was wondering if there is another under the dash.





2001. 5 3500. completely stock

 

[RADdodge]

Here is another post on the subject - it might help...

https://www.turbodieselregister.com...on-discussions/128198-blinkers-dont-work.html

 

[DieselDoghouse]

OK - your mileage may vary but in my experience I've had trouble with dirt contaminating the hazard switch mounted on top the column (so it can collect dirt) just this monday prepping for state inspection whipped the hazards on - only one side lit. Some contact cleaner sprayed into the switch and application of judicious elbow grease to work it in and everything was fine. Please note to the doubters - I did not touch bulbs, flashers, or harnesses. IMHO its a uniquely exposed switch that we-uns don't operate often = bad combo.

 

[olebum]

Hazard or 4-way's now working!!!

Oo. Thank's to all that responded to my request. In my fuse box, located

at the end of the dash, therre is only one flasher unit. After replacing the unit the flashers are now working. I was under the impression that there were two seperated units.

 

[PBJ2500CTD]

I believe the later Gen 2s have a "combined" flasher unit.