Headlight Fluid, Should I let the dealer change it?

[Steve M]

Doc? Use "my" toothbrush? I use my wifes toothbrush. I can't stand nastiness!

I noticed my wobblin' rods and nibblin' joints ain't got no zerk fittings on 'em.

 

[McDowra]

I'm I the only one who bored out his ashtray, installed oversize muffler bearings? Almost forgot does anyone make a hipo thingamajiggy?

 

[EShaw]

You guys worry WAAAAAAY to much... ... . The stealer takes care of ALL those things when you go in for your regular scheduled maintenance visit... ... . They also scan yor truck for possible bombs and diffuse each and every one of them. In addition to lubing your sphinctor bearing before they stick it to ya! That's what makes them a 5 star. That's their job, that's what they do!

Eric

 

[Andy Perreault]

Does anybody know where I can get a set of loosening wrenches? I was told that the wrenches I bought were for tightening only.



Also, where is the map light sensor on these trucks? Is in near the horner-honker? BTW, the dealer told me that since the Germans took over, the doohickey is now referred to as the Dingleschprakket

Andy

 

[EricBu12]

ROFLMAF!!!!

You guys KILL me!



you know I have a left peddle that makes the truck slow down but revs are still there, maybe I should remove it and weld the clutch together, talk about lock up!

 

[Turbo Thom]

Well for me, I drilled a hole in each core. Now I run dry. I don't have that sexy underwater look, but I can see better.



. . Preston. .

 

[TomGolden]

Hey, if you guys have CB or Ham radios, don't forget to carry a spare can of squelch in your tool boxes, and remember to change it out every 1000 hours of radio use.



Also, for those who tow trailers regularly, next time you get to Camping World, stock up on ground guides. I saw an ad in our local paper this weekend - $9. 99 a box! Can you believe how cheap that is



Tom

 

[AggieJustin]

KaleCo Automotive

For those of you who don't want the stealer doing all this maintenance, you can get plenty of parts from the aftermarket:



KaleCo Automotive



I'm currently waiting for my cross-drilled brake lines and exhaust filter to arrive.

 

[DieselDoghouse]

headlight fluid

OK when yous guys change your headlight fluid, do you prefill the lamps before turning them on?? or will the bad photons just boil off the first time. Anyone seen the headlight magnets advertised to straighten the beam? you never hafta adjust again!!