Here I am

Heads Up N.E : Hooter's Meet August 24th

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Schied Diesel Extravaganza Diesel Drags!

Roll Call for MIR

Its not like you're buying dances at a strip club... . your buying wings and beer... . keep your foot off the soot pedal for a few days... that'll save some bread!! ;)



Matt
 
Tnt, i have a FP guage you can hook to your shrader valve. tcoombs,I can help you with the pyro install,let me know if you need me to bring the tap/drill bits,and if its a 1/8" or 1/4" NPT pyro.
 
Snow man....

Let's see... I have 1/4 NPT probe, 1/4 NPT tap, a couple of 7/16 bits, a couple of pilot bits, an 18V drill with a couple of batts... . what else... rags, magnet... grease?
 
Re: Pyro Install?

Originally posted by tcoombs

Anyone willing to help with a pyro install? I'm a bit nervous about drilling the hole.



I have no problems neither I'm nervous drilling holes in someone else's manifolds:rolleyes:
 
hey guys

Hey anyone heading in from NH,ME,VT area we will be at the toll booth of masspike rt 90 and 84 at 11 just thru the booth on the right. Any one from south mass can just meet us their i will be rolling thru and only waiting a few minutes. Anyone coming from the north remeber to take rte 290 off 495 to the masspike instead of coming way down 495. If anyone has questions just call me at my shop number it rings my cell phone. 508 528 6127. Oo. Oo. Oo. Then we will be on our way to see Oo. Oo. :--) HOOTIES





scott
 
Tcoombs... ... . be sure that you do in fact have 1/4 npt threads on your pyro. The instructions that came with mine sai that is what they were, turned out they were 1/8 npt.



Sorry I'm gonna miss this one... ... ... ..... again:{ :{



George
 
Myself, ToolMan, sseifert, and a few others will be meeting at the Pilot in Milford at 9am. Anyone from lower Fairfield county, post here if your going to meet up with us so we can look out for ya!
 
since it's on my way down, i'd like to hook up with ya scott and the others. but the last time is was down there, there was a major traffic jam to where my dad and i go off exit 10 onto route 20 and headed down to exit 3 on 84. i'm just worried about another one.



hey, did CT do away with the radar detector law? i didn't see a sign before.
 
Yes, Detectors are now legal in CT.

Law was repealed about 5 - 6 years ago, I believe.



We'll see you all there. I have a suprise to show off ;)

I'll be there around 11:00 am and I'll also be leaving early - around 1:30 due to family commitments.
 
Originally posted by Mactruck

Yes, Detectors are now legal in CT.

Law was repealed about 5 - 6 years ago, I believe.




... and Mactruck would know!!!!



We'll see you all there. I have a suprise to show off ;)



... you've had your bubbies augmented?
 
Back
Top