Help!!!! 2008 Ram 3500 6 Speed DOA

[hwebster]

My truck imploded 2 weeks ago... Front shaft blew off and ripped out my transmission/Transfer Case harness and the harness to the read of the truck along with the clutch hydraulics from the firewall down!!!! )@(#*$&*$&

I need to find a wiring harness for the transmission/transfer case!!! PN is 04801409ad been discontinued I am told and my mechanic can't locate one!!!!

Anyone who might know where I can get on please let me know!!! Thanks Alll

 

[Wayne M.]

That shaft had to give some warning before it blew! We’re you pulling big weight?
There are plenty of parts trucks around, it’s going to take some perseverance to find what you need!

 

[hwebster]

That shaft had to give some warning before it blew! We’re you pulling big weight?
There are plenty of parts trucks around, it’s going to take some perseverance to find what you need!

Nope but we had been hauling bales and picking rocks. I think I hit something on the road that might have triggered it... Looking all over for parted out trucks. The manual transmission is the issue these days... Thanks Wayne!

 

[Plane]

I would love to know the outcome of this situation. I have the identical truck with the same issue except I found a 1409AD harness on eBay.

 

[BigPapa]

Go to https://car-part.com/

 

[hwebster]

I would love to know the outcome of this situation. I have the identical truck with the same issue except I found a 1409AD harness on eBay.

Well it took some time....
1 - both harnesses were rebuilt in Florida.
2 - the ECM had to be rebuilt to avoid voiding the warranty on the cables
3 - I still had issues that were resolved by some of jumpers on a circuit and a new fan compressor pump.. works fine now

 

[Plane]

Well it took some time....
1 - both harnesses were rebuilt in Florida.
2 - the ECM had to be rebuilt to avoid voiding the warranty on the cables
3 - I still had issues that were resolved by some of jumpers on a circuit and a new fan compressor pump.. works fine now

It's good to know there is light at the end of the tunnel
If I need it, would you mind sharing the contact info of the company that rebuilt your harnesses?

 

[hwebster]

With pleasure...http://www.autocomputerspecialist.com/ very satisfied with the service...

 

[Plane]

Awesome.....Thanks much!