Here I am

HELP!!broken ring in transmission pan, what is it

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Interesting results after heavy duty clutch hydros were installed

transmission cooler

Status
Not open for further replies.

Hnick16

TDR MEMBER
First; 2005 dodge ram 2500, 5. 9 litre diesel,stock truck minor cosmetic upgrades with basic routine maintenance.



i took off my transmission pan and noticed what appears to be a large snap ring. probably the size of a softball. there are no holes in the end that a traditional snap ring has. After a quick google search i leaned towards it being the "overdrive snap ring. " I have posted pictures below.



I changed the fluid and filter because my transmission is acting up. Most likely it is the governor pressure switch and or solenoid. I will change both to be sure. I have already changed out the transmission output shaft speed sensor for 21 bucks. the transmission is staying in first gear for 15 minutes till the fluid warms up then shifting to second and starting out in second too. I do get a trouble code which is the GPS (governor pressure sensor).



So basically, on top of my hunt for the quick transmission flush and inspection i was thrown an added bonus of this so called snap ring stuck on the danny magnet.



any help is appreciated. Thanks. TDR fanatic do it yourselfer.

IMG_5515.jpg


IMG_5516.jpg


IMG_5517.jpg


IMG_5520.jpg


IMG_5521.jpg
 
Status
Not open for further replies.
Back
Top