Engine/Transmission (1998.5 - 2002) Help NV 5600 Availability

[Regcabguy]

:{ I know Dodge changed suppliers for their NV5600 but I can't believe the company would just go under. Parts replacement alone would enable the plant to remain open albeit fewer employees. These trannies are everywhere! Does this mean there's no parts for the NV4500 also? I wish I'd gone with the manual but my auto doesn't seem quite so worthless now.

 

[KNaugle]

Just wanted to let everbody know Drive Line Specialist in Las Vegas still has parts for the 5600 thanks n7gxz. Parts on the way. Oh by the way I was trying to post to another location and my post showed up here sorry.



KAN

 

[V-Metalworx]

I,ve got a 2000 5600 with the same problem I need syncros this deal is really ticking me off I love my cummins power and I dont like auto trannys my problem is if I do ever scrape together the parts to fix my 5600 what happens in another 100K when it needs new syncros the 06 trannys are prone to case spread under high torque so how do I find out more about this fuller transmission any help would be great

 

[blacksheep4x4]

Talk to Scott at High Gear Trans. I picked up a rebuild kit for mine for $351. 00 plus shipping. He said they will also be getting Main shafts and countershafts in a week or so. Go to www.highgeartransmission.com for info and prices.

 

[kscheffler]

No 5600 listed in high gear transmissions

I do not see a rebuild cost for the 5600 on the attached site?

 

[blacksheep4x4]

Email Scott he'll give you the cost.

 

[V-Metalworx]

Eaton Fuller

Here is the on going search, Dealership is checking to see if new 6 spd trans out of an 06 will bolt up. And what changes need to be made. I have checked with Eaton Fuller, they also produce a 6 spd with similar ratio's that I know will bolt up to the back of the Cummins in Medium duty trucks. Then comes the trick is to bolt the transfer case up to the back of Fuller. I talked to advanced adapters to see if they have done anything yet as well, but as of yet nothing for the 5600. Advanced adapters does make adapters for the 4500 from the Getrag. I do not have the ratio's for the D. C. 2006 mercedes 6spd but do have the ratio's for the 1st generation NV5600 with 1. 25" input shaft.



1st---5. 63

2nd---3. 38

3rd---2. 04

4th---1. 39

5th---1. 0

6th---0. 73

REV---5. 63



Back with more news soon



Kirk

What? ABOUT THE FULER SIX SPED ANY MORE INFO WHAT DID THEY COME IN

 

[V-Metalworx]

Thanks for the info on High gear it's about time Igot to talk to a no bull guy Scott is very helpfull and did'nt try to sell me a bunch of stuff I did'nt need Thanks agine Mark.

 

[blacksheep4x4]

Thanks for the info on High gear it's about time Igot to talk to a no bull guy Scott is very helpfull and did'nt try to sell me a bunch of stuff I did'nt need Thanks agine Mark.

Anytime

 

[V-Metalworx]

NV5600 input shaft

I've got an early 2000 NV5600 I'm changing the input shaft from 1. 25 to 1. 375 I know I have to get a different fly wheel an starter spacer but do I need to change the clutch fork to ? anyone know where I can get a flywheel for the 01 or 02 six speed trucks Thanks Mark.