Help on reinstalling dip stick with new intake

[jshumate]

I know this is supposed to be a no brainer, but I'm in the middle of installing a CFM+ and the new mount for the dip stick isn't even close to the dip stick bracket. If I try to force it over, the tube hits a junction block on the fire wall. What am I missing?

Thanks,

 

[p-Bar]

John I just sent you a PM

 

[SierraRam]

I had a similar issue with my ATS intake horn, just had to make a few gentle bends. Be very careful or you can kink the tube.

 

[AH64ID]

Also be careful at the wire-loom. I have read of the CFM putting the dipstick close enough to rub wires bare.