Help with Gauge Install Utah.

[RHyland]

I just received my Gauge Pods and my Di-Procol transmission(also got the transmission Drain Plug kit for installing this), EGT and Boost Gauges , and I need help installing them, is there anyone in the Salt Lake Valley that could help/install them for me? I am very new to this and don't want to mess anything up.

 

[PHX ATC]

I betcha somebody out there will help you... normally they all love to dig right in and help! If you were in AZ, I'd help you out and we'd flounder together.

 

[DocDetonancour]

Did you get the cubby hole basel?

 

[RHyland]

Originally posted by Doc DeTon

Did you get the cubby hole basel?

I had purchased the 3 pod a pillar from gosracing.com it matches the interior of my truck I don't have to paint it.

 

[RHyland]

Originally posted by PHX ATC

I betcha somebody out there will help you... normally they all love to dig right in and help! If you were in AZ, I'd help you out and we'd flounder together.

thanks

 

[amsoilman]

I live in Roy, so you would have to do some traveling!



Wayne

amsoilman

 

[RHyland]

Originally posted by amsoilman

I live in Roy, so you would have to do some traveling!



Wayne

amsoilman

thanks, I might just have to take you up on this, Isn't roy about 45 min from SLC? I think I have been up to Roy once. I would only be able to come up on a weekend, are weekends good for you?

 

[RHyland]

anyone? Or even if someone can recommend a shop I can take it to that won't charge me a arm and a leg to install these.

 

[RHyland]

is there nobody on here from Utah that can recommend a shop to go to for the install?

 

[Air Bulldog]

Ken Jones at Diesel Performance 1- 801- 791- 2328 he is one of the best any were.

 

[CLAYTON]

Had mine hooked up by performance chips of utah. I'd help you install if I knew how to do it.

 

[TDragna]

I just finished installing my gauges and I could walk you through it if you wanted to do it yourself. I used the 3 gauge A pillar from Genos. TDragna

 

[AHutchison]

I could send you pictures of the install. Just recently put mine in. I have di-pricol guages fuel pressure/ boost/ EGT. Sorry can't help you with the trans install. let me know if you would like pictures.

 

[Briman]

I second Ken Jones.

 

[Josparkz]

Gillet Diesel.



http://www.gdsdieselparts.com/



You have a garage at your house to do it in?

There not that tough, just might not get it all done at once

 

[RHyland]

Well it has been a while. I have still haven't been able to get my gauges installed before it was because I didn't have the time now it is because I don't have the money. Is there anyone here in Utah that can help me with the install?

 

[justinp20012500]

Well it has been a while. I have still haven't been able to get my gauges installed before it was because I didn't have the time now it is because I don't have the money. Is there anyone here in Utah that can help me with the install?

Did you get them in??? I have installed about 7 sets and just one set on a 03-04. 5.

What kind of gauges did you get?? Pyro, trans boost?

The trans is the hard one. I would recommend you get a mag hytec, that makes it very easy to install. Also by the boost bolt from genos.

 

[RHyland]

Did you get them in??? I have installed about 7 sets and just one set on a 03-04. 5.



What kind of gauges did you get?? Pyro, trans boost?



The trans is the hard one. I would recommend you get a mag hytec, that makes it very easy to install. Also by the boost bolt from genos.

I purchsed the Trans, Pyro and Boost. all Diprocol. I installed all the gauges except for the Trans Temp Gauge, It is in but not wired up. I need to save up some money to get the Mag Tech Double Deep Pan then I will finish with install. I noticed that the light is brighter on the transmission Temp gauge then it is on the other ones.

 

[justinp20012500]

Glad to hear you got them in. Just PM me if you ever need any help doing more bombs or just advice.

 

[ChrisKringle]

Just say no to Performance Chips of Utah

Don't take it to Performance Chips of Utah. Robert there screwed up the injectors on mine 3 or 4 times. 5 gallons of diesel in oil pan, had to sell the truck. Start from scratch... , want somethin' done right ya gotta do it yourself. Goes a long way.