HEY ROB. WHERE IS THE 3 GAUGE PILLER POD

Archive · Jul 2, 2000

Just checking in to see if anything is happening with our 3 gauge piller pods. We are anxiously waiting for some news.

------------------
2000 DODGE SLT,ULTRA-RUNNING BOARDS, AMERICAN TOOL BOX/FUEL TANK,AND REESE 20K HITCH,GTS BUG SHIELD,RHINO LINING . MEDIUM SIERRA BRONZE, QUAD 2500 LONG BED. 4:10 POSI-TRACTION REAR END W/AUTOMATIC. STAN'S 4" EXHAUST SYSTEM TURBO BACK, AND VOYAGER BRAKE CONTROLLER,PIRO/BOOST/AND TRANY GUAGES. ULTRA-BOARD MUD FLAPS. HEAVY DUTY TOWING AND ALL ACCESS. K&N AIR FILTER. MOPAR DEEP ALUNIUM TRANY PAN. KLEEN WHEELS, DD STAG 1 INJECTORS. CUSTOM BURLWOOD DASH KIT AND WINDOW SWITCH COVERS. 29' ALPENLITE 5TH WHEEL W/SLIDEOUT. 5" GENO'S CHROME EXHAUST TIP. STULL ALUMINIUM BILLET GRILLE. STAINLESS WHEEL OPENING TRIMS. POWER VENTED TRANY COOLER. Hellwig 3500 progressive overload springs.

[This message has been edited by ALPENLITE (edited 07-02-2000). ]

Archive · Jul 2, 2000

Search through some old posts here, Lo-Tek kinda beating around the bush in makin them. They said their supplier backed out, so find the thread and email them on your own to show interest. Last email I got from them said they were still working on it. If I have time I will find the thread for you, where I posted their email address.

I didn't wanna wait so I got the #15002 from Autometer that sits on the dash by the window in between the defrost vents. I think I will like it much better anyhow.

[This message has been edited by KatDiesel (edited 07-02-2000). ]

Archive · Jul 2, 2000

I have a 2 gauge piller pod and is is outstanding , but would like to had my boost gauge along with piro, and trany temp gauge. Thanks for the info Kat.

------------------
2000 DODGE SLT,ULTRA-RUNNING BOARDS, AMERICAN TOOL BOX/FUEL TANK,AND REESE 20K HITCH,GTS BUG SHIELD,RHINO LINING . MEDIUM SIERRA BRONZE, QUAD 2500 LONG BED. 4:10 POSI-TRACTION REAR END W/AUTOMATIC. STAN'S 4" EXHAUST SYSTEM TURBO BACK, AND VOYAGER BRAKE CONTROLLER,PIRO/BOOST/AND TRANY GUAGES. ULTRA-BOARD MUD FLAPS. HEAVY DUTY TOWING AND ALL ACCESS. A POSI-TRACTION 4:10 REAR END. K&N AIR FILTER. MOPAR DEEP ALUNIUM TRANY PAN. KLEEN WHEELS, DD STAG 1 INJECTORS. CUSTOM BURLWOOD DASH KIT AND WINDOW SWITCH COVERS. 29' ALPENLITE 5TH WHEEL W/SLIDEOUT. 5" GENO'S CHROME EXHAUST TIP. STULL ALUMINIUM BILLET GRILLE. STAINLESS WHEEL OPENING TRIMS. POWER VENTED TRANY COOLER. Hellwig 3500 progressive overload springs.

Archive · Jul 2, 2000

I've emailed Lo-Tek twice, with no reply.

------------------
Randy Jones, San Antonio, TX, 98 1/2 QC, 4X4, American Racing BAJA's, 285/75/16, Amsoil throughout

Archive · Jul 2, 2000

Got this from Diesel Injection Service's main page...

"Two updates after talking with Greg at GaugeWorks (the pillar mounts)

He does plan to offer a 2 & 3 gauge FULL Pillar Mount for the 1998 and later model Dodge Cummins. His hopes are to make one that relocates the tweeter for those with the Infinity setup with the tweeters on the pillar. (No ETA but will keep you informed here as we get more information)

He also has plans (could be 6 weeks or more) to offer colored pillars for the 1999-up Ford Superdutys.

(6/7/2000)"

Looks like the wheels are in motion!

#ad

BOMBED
------------------

<body bgcolor="#FFFFFF">



Evan A. Beck "NW PUNK"
Prez, NW BOMBers




'01 2500HD 4x2 QC, 139" WB, 6-speed, ETH, SLT... yadda yadda yadda... K&N, 3" "PIPE BOMB", 6-way turn signal conversion, aux. backup lights, Line-X, Mopar rubber mats, Cummins badging, SPA Technique boost & pyro gauges. 5,250 miles and counting! Look for me on AOL as “Beck2500!”




<marquee> #ad
Check out NW PUNK for more info! #ad
</marquee>

Archive · Jul 2, 2000

Hi fellas, Who makes the best looking 2 gauge pillar pod? I can't afford to wait any longer with these guys jerking us around.

How hard can it be to produce the molds? It seems that we have enough would be buyers to get their attention.

I could've carved one outa wood by now!

------------------
'99 2500HD Quad Cab 4x4,Intense Blue Pearlcoat,fully loaded w/Agate leather interior,5-speed,4. 10 limited slip,Skyjacker Leveling kit,Heckethorn Nitro 9000 shocks w/dual end to end steering stabilizers,35x12. 50x16. 5 BFG/AT KO's on 9. 75x16. 5 Eagle 589 Aluminum Wheels,9004 Cool Blue's,Silencer Ring removed,Fog Lights relay pulled,No muffler,No resonator,4" straight pipe,Northwest Customs Stainless Steel Rocker Panels,Steel Horse Stainless Steel Nerf Bars,POWEREDGE W/SUPER-DYNA-WHOPPIN' HOT#3 PROGRAM

[This message has been edited by WOWZY (edited 07-02-2000). ]

Archive · Jul 2, 2000

WOWZY,

Auto-Meter makes the best looking dual gauge pod. It just attaches right to the pillar with a few "plastic rivets. " The pod is easy to paint, and is very easy to install. I have one for a 1998-2001 truck, and is for sale. Let me know if you are interested. It is the old pod from my 1998. 5.

#ad

BOMBED
------------------

<body bgcolor="#FFFFFF">



Evan A. Beck "NW PUNK"
Prez, NW BOMBers




'01 2500HD 4x2 QC, 139" WB, 6-speed, ETH, SLT... yadda yadda yadda... K&N, 3" "PIPE BOMB", 6-way turn signal conversion, aux. backup lights, Line-X, Mopar rubber mats, Cummins badging, SPA Technique boost & pyro gauges. 5,250 miles and counting! Look for me on AOL as “Beck2500!”




<marquee> #ad
Check out NW PUNK for more info! #ad
</marquee>

HEY ROB. WHERE IS THE 3 GAUGE PILLER POD

i've got the tool to help on 1st oil change

Cummins tools

Archive

Archive

Archive

Archive

Archive

Archive

Archive

Turbo Diesel Register