Hey, ya' know that grease spec'd for the front driveshaft...?

[Bob V]

Mine doesn't look like that. It is a PAIN to see! I have to lay under the trans and look past the front of the cross member to see it. I jack up one front tire and turn the driveshaft by hand. Even thought I know it is there it is still hard to find.

 

[DBentley]

found and greased mine last week at 2500 miles. What a pain in the neck. A 2 min. job took 20 min. Mabey next time it will be easier. Where are the rest of my fittings?? This rig should have 10 or more. I should get on one knee and thank the dodge gods for the 3 we got I guess.

 

[Graphite 6]

What needle fitting is everyone using. This seems to be a point that is not clarified. Anyone who has has definite sucess please post your fitting numbers. Thanks

 

[wheatman]

i think just about any needle fitting will work. i found mine yesterday and lubed for the first time... take a real good flashlight and raise one tire so you can spin the axle by hand. look from the front of the truck back and you will find the zirt on the part BEHIND the front U Joint (your lubing the part in the middle between both U Joints. Its there.