High Idle, 06 and Manual

[Big_Horn]

Wire Harness's, switches and headache's?? My 06 manual kicks into high idle (1000 rpms) when its cold out side, by itself without all the hassle. Does this switch allow the high idle to come on at anytime??

 

[KPersinger]

Does the dealer have turn on the high idle or can I do it myself onan O6 auto?

 

[RankRam]

Does the dealer have turn on the high idle or can I do it myself onan O6 auto?

The dealer needs to enable it.

 

[Hercules130]

I ordered it from lou fusz dodge, but it came in a cummins box.

 

[Hercules130]

Pictures

Here are the pictures.

 

[TowPro]

cool. thats the same switch I got from cummins, only I made my own bracket.

 

[hickory]

How much did the kit cost. Looks like the parts i got from cummings less the bracket

 

[Hercules130]

$250 from lou fusz.

 

[JWinters]

Hey Hercules130 do you have the part number on the cummins box for the whole kit?



2006 quadcab 3500LB,4x4 Kore Recon,Interco SS 35x10. 5x17,

 

[JBonpua]

Switch not needed

PM me for detailed instruction with pics how to ground ECM B connector pin #22.

 

[MillerR]

Sorry, but high idle at 1000 rpm is needed for what exactly? -Trey

 

[Bob Wagner]

to the top

 

[DGamelin]

A higher idle raises cylinder temperatures to help warm up the engine. And most pto pumps need the extra rpms for proper flow.



__________________

93 250 2wd xc 354 auto 264k

04. 5 3500 4wd cc dully 373 6-speed 87k

 

[CDonaldson]

You can get the clutch switch from PacBrake, same switch used for their brake install. Most people have just pinned#22 of the rear connector with a short jumper wire and run it to ground on a nearby bolt. Works fine that way as long as you remember to set your parking brake, transmission in neutral, then set your cruise. It will idle up to 1500.





CD