high mount a/c bracket???

[F8LDOSE]

If anybody can help, it's greatly appreciated. We have a 5. 9 in a 89 suburban, the factory a/c setup won't clear the front crossmember. Has anybody been able to source a high mount bracket that puts the a/c compressor over the alt. I was told such a peice was used in some freightliner apps but can't find anything. Thanks!

 

[Shadrach]

In non-Dodge applications the air comp on a "B" is usually mounted over top of the fuel pump area on the front of the head. There are different brackets depending on the brand of A/C comp. Shadrach

 

[DVolk]

high mount a/c bracket ???

Im assueming your burb is the same as mine



the only high mount is on a Kenworth 300 mid ranger



when you say stock A/C is it the cummins one or the GM one your tring to mount ?



it will fit if you change the the cross member the second one to a drop one and trim the first one and notch the frame then your AC will fit fine



with no issues , id send you pics of mine but , i need a compressor but it does it , my compressor was junk , if and one has a compressor to fit a 95



im intersted in it

 

[JUeckert]

some construction equipment, also have the high mount bracket. my kobelco excavator has the high mount bracket . as mentioned, it is located near the injection pump, off top of the head . there are three bolt holes in the head, where the bracket mounts. my excavator has the serp belt, and a stacked v belt pulley, for the compressor. having said this, i intend on fabbing a similar setup for my 98 model gmc/cummins conversion. i intend on staying with the gm a/c arrangment also. .

 

[ajwaverider]

Try cummins (part# 3930888) moves the ac up by the alternator. Let me know if it's still available. AJ

 

[Scot]

<a href="http://s270.photobucket.com/albums/jj105/nozzleman201/?action=view&current=2008jjuly03002.jpg" target="_blank">#ad
</a>


<a href="http://s270.photobucket.com/albums/jj105/nozzleman201/?action=view&current=2008jjuly03001.jpg" target="_blank">#ad
</a>

 

[ajwaverider]

Did you make your own bracket Scot? dodge compressor or the ford?any more info

 

[Scot]

I built the bracket. Sanden 508 compressor. I initially tried to swing the comp on one end and use the long alternator bracket style on the other. What I found was that I could not swing it at the right angle to change the distance much. In the end the slide bracket works pretty well. I just built in into the top of the Leece 555HD alternator bracket. Cummins sells a v belt pulley.

 

[ajwaverider]

Will prob fab something up but will switch comp to 134a inplace of r12 I have now.