Here I am

high pressure rails

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Wheel hop

How Hard is it to come by a junked DPF

Status
Not open for further replies.
how prevalent are leaking injectors on the 3rd and 4th generation trucks . I see a lot of posts with people getting the dealers to check for leak down ( injectors dumping fuel in ) Are the newer trucks any more problem than the old ,say 12 valve ?
 
Yes... You can burn down CR 10 easier and faster then 1st & 2nd Gen,But when they are dial in they are awesome,Most CR problem are related to poor aftermarket engineering and lack of proper support.
 
Fuel filtration is a must a 7 micron piece of crap going through a common rail at 23k psi can do some damage to injectors.
 
Status
Not open for further replies.
Back
Top