Engine/Transmission (1998.5 - 2002) Homemade exhaust stack, what do I clamp it to the bed with?

[VIPERBLUELX]

I built a homemade(cheap) 4" exhaust with a single stack through the bed. It sounds great, but it vibrates pretty bad since I don't have it strapped or clamped to the bed anywhere, what are my options?



thanks



Mark

 

[UP N MTNS]

I built a homemade(cheap) 4" exhaust with a single stack through the bed. It sounds great, but it vibrates pretty bad since I don't have it strapped or clamped to the bed anywhere, what are my options?



thanks



Mark

Mark go to a big rig "chromeshop" they will have every kind/size of clamp. . I got all my stack stuff at one.



Adam

 

[VIPERBLUELX]

Mark go to a big rig "chromeshop" they will have every kind/size of clamp. . I got all my stack stuff at one.



Adam

But what am I looking for to strap or clamp it to the bed?

 

[kelly4463]

Go to a big rig shop all the parts you need

 

[UP N MTNS]

But what am I looking for to strap or clamp it to the bed?

Thats what I did also... .



#ad




I bolted the clamps to the bed rail. .



#ad






Hope that helps,I will take a pic of them on the truck tomorrow if you need it.



Adam

 

[Diesel Dummie]

On my stacks i just took a regular 5 inch chrome exhaust clamp drilled two holes in the front of the bed on the top rail facing the rear of the truck tightened the clap to hold my chrome pipe , put the clap thru the holes and added another nut and washer on the other side to hold it in place. Its kinda tight to get to between the cab and bed but it workd great. They dont move or vibrate at all.

 

[VIPERBLUELX]

thanks guys