Engine/Transmission (1994 - 1998) Horsepower

[mullady76]

Right now my trucks in the shop for the transmission and exhaust manifold. I'm thinking of having them put in the governor spring kit and a set of 191 dv's. What horsepower number should I be making with these along with a #6 camplate, 370's?



Thanks,

Sean

 

[Rams-n-Hogs]

I'm not sure the GSK will give you any, but the truck will rev a lot higher, making it feel like you have tons more. The 191's I'm not sure about, as I already have a 215 pump, and I don't and probably won't use them. My guess would be between 300-350 rwhp when you are done, probably closer to 350. I'm sure you will get varying answers on this.



Jim

 

[Jim Fulmer]

Now that I have tested the Lazer cut DV's, I would like to see someone try them on a 215 pump, keep in mind you WILL have to increase the timing to get the effect.



Jim

 

[Rams-n-Hogs]

Thanks, Jim



You had to say that didn't you? Every time I say this is the last BOMB, something else pops up. Then after the DV's, I'll have to go with an HX-40, (or bigger). Does it ever end?



Jim

 

[Underdog]

Originally posted by Rams-n-Hogs

Thanks, Jim



You had to say that didn't you? Every time I say this is the last BOMB, something else pops up. Then after the DV's, I'll have to go with an HX-40, (or bigger). Does it ever end?



Jim

Sure it ends. When you're toes up at room temperature!

 

[vssman]

'76,



On a side note, how is it with the EGT's?

 

[mullady76]

Egt's hven't gone above 1400 degrees. If I get the 191's & gsk they will go through the roof.