How can I determine if this 15 SB DRW bed will fit my 17 ?

[JPM]

How can I determine if this 15 SB DRW bed will fit my 17 ? All the fuel, dep tanks, fittings and mounts could be a nightmare. Help in the Midwest? Still want to do a conversion , as Ram does not make a SB CC DRW , but they do make a SB MC DRW

https://www.ebay.com/itm/2015-Dodge...RZwAAOSwYUZb~EP-:rk:4:pf:0&LH_ItemCondition=4

 

[Wiredawg]

I would expect the dimensions from each respective year could tell you roughly if it will physically fit. another option is to find the 15 and physically measure all the critical points. finally, a good Ram dealer service or body tech might know. Not much help but does ID the options. Cheers, Ron

 

[Timd32]

How can I determine if this 15 SB DRW bed will fit my 17 ? All the fuel, dep tanks, fittings and mounts could be a nightmare. Help in the Midwest? Still want to do a conversion , as Ram does not make a SB CC DRW , but they do make a SB MC DRW

https://www.ebay.com/itm/2015-Dodge...RZwAAOSwYUZb~EP-:rk:4:pf:0&LH_ItemCondition=4

Ramtrucks.com go the ram body builder section.

The note for 2017 I found said same as 2016, unless changes listed under 2017, could not find a 2017 drawing so should be same as 2016, the drawing for 2016 and 2015 are the same.

But as always research as much as possible. Should be the same from what I see.

This is the dimension sheet I could find.

Google that ram body builder and should be able to find alot of info.

 

[JPM]

Ramtrucks.com go the ram body builder section.

The note for 2017 I found said same as 2016, unless changes listed under 2017, could not find a 2017 drawing so should be same as 2016, the drawing for 2016 and 2015 are the same.

But as always research as much as possible. Should be the same from what I see.

This is the dimension sheet I could find.

Google that ram body builder and should be able to find alot of info.

thanks, looked all the data over and almost everything lines up except the fuel door opening and a cab to bed distance @ .2"difference. Exhaust terminations are different also . I thought of another snag( there would probably be a lot) , what would a SRW truck's brain do with six tire pressure monitors?

 

[gsbrockman]

thanks, looked all the data over and almost everything lines up except the fuel door opening and a cab to bed distance @ .2"difference. Exhaust terminations are different also . I thought of another snag( there would probably be a lot) , what would a SRW truck's brain do with six tire pressure monitors?

You delete the sales codes for single rear wheel TPIS and add the sales codes for dual rear wheel TPIS.....not sure if the RF hub has to be changed out or not.