2nd Gen Non-Engine/Transmission How do I place a pic of my rig on here?

[FireHouseBBQ]

Can someone tell me where I need to go and what I need to do to place a pic of my rig on here. I tried to go to readers rigs and put it in there but could not figure it out.





Thanks,

Craig

 

[Theconcreteguy]

let me know to

 

[Thomas]

Click this. Or this.

 

[FireHouseBBQ]

Tried all of that but it does not say anything on the bottom about place a pic. Tried to edit my profile and there is nothing about placing a pic at the bottom.

 

[FireHouseBBQ]

Ok I got it... .



Thanks

 

[EricBu12]

after posting the pics on the readers rigs, do this so you can post the pic very big.



Picture Posting instructions



Hey, this might be a little complicated but if you follow the instructions, it will work ok.



Create a readers rigs gallery by clicking on the readers rigs button at the top of the site. Follow the instructions on it. the Pictures have to be less than 122K you can find out how big they are by putting the mouse over the pic and hold it there. A tag will appear to show you what size it is. If it is small enough, you can upload a pic to the readers rigs.



Now, Have 2 windows of the TDR open. one to the posting, one to your readers rigs gallery.



In the readers rigs, find the pic and I usually use #2 size. open it, then in the pic, right click it, and select properties, a window will pop up and in the middle of it if the URL address listed. Highlight it, then right click and copy it.



Now go to the posting site



The code to do this is hard to show you without some "*" in-between otherwise you wouldn't see it... . so what you see, do NOT type the "*" the only space you type is inbetween the SRC and IMG

insert the URL of the pic after the "=" by putting the cursor there and right click and paste. a "/" goes after the URL.



here is what it will look like and a pic of my truck below it.



<*img*src*=(URL)*/src*img>



<img src=https://www.turbodieselregister.com/user_gallery/sizeimage.php?&photoid=240&width=2/src img>

 

[Steve St.Laurent]

It's easier than that. There is a link at the bottom of the picture that says "Forum codes". If you click on that button it will give you the exact code you need to past into your post for a picture to show up. Simply select the text with your mouse, right click and click on copy. Then go to post or edit your message and right click where you want it to be and click on paste. Howeer, keep in mind that pictures aren't allowed in signature lines.