How Does This Sound ?

[TCluff]

I AM GOING TO BUILD AN 8 INCH LIFT, RUN 37 INCH TOYOS ON 20X10 WHEELS, THEN MODIFY MY RAIL, FILL IT WITH A TST R-49, TS STACK, AND ADD A SMARTY, THEN I WANT TO ADD A SECOND CP-3 OR A CP3. 4 DEPENDING ON THE OUTCOME WITHOUT MORE FUEL FLOW, I WOULD APPRECIATE ANY COMMENTS GOOD OR BAD, THANKS J. T.

 

[JFlagg]

Is this for the truck in you sig? Other than the 2 more inches of lift and the second injector pump it doesn't seem any different. No experience with Smartys, but from what I read, you might not get much out of it with what you have already. I might be wrong, I'm sure someone will jump in and let me know More fuel will almost always help, you didn't state what twins you have, but I'm sure they will handle more fuel than you current CP3 and FASS are giving them, though, might get real smoky... Don't know what you truck looks like with 6" of lift and 37's, but personally, I'm not a big fan of more lift than needed. If your tires won't rub now, you are high enough. Unless you are going for the shock factor, than its a whole 'nother story.

 

[cclark746]

i agree if you gonna put 2 more inches of lift on that thing you should run the 40 inch toyo mud tires. and if you doing all that with a 6spd your gonna be mad when you get out ran by an auto that doesnt have near the $$$$ in his truck. IMO

 

[TCluff]

i agree if you gonna put 2 more inches of lift on that thing you should run the 40 inch toyo mud tires. and if you doing all that with a 6spd your gonna be mad when you get out ran by an auto that doesnt have near the $$$$ in his truck. IMO

everything will be ok as long as i have 800h. p. , outran by an auto, but not outpulled, haha maybe i will put an auto in it too... i am ordering 20x10 kmc badlands wheels, i found some kumho tires with a 38. 1 inch diameter... for less than 400 a tire, the wheels are only 330 per rim... lets go break something ... :-laf

 

[Ram Rod]

How are you going to add 2 inches? Spacers maybe? That is what I did, and it worked fine except the control arms are made for 6 inches of lift. When you add spacers your front axle wont be centered in your fender well. And your tires will rub when turning. I had custom size control arms made from TOPGUN Customs ($275. 00) and it fixed everything. Hope this helps.

 

[TCluff]

How are you going to add 2 inches? Spacers maybe? That is what I did, and it worked fine except the control arms are made for 6 inches of lift. When you add spacers your front axle wont be centered in your fender well. And your tires will rub when turning. I had custom size control arms made from TOPGUN Customs ($275. 00) and it fixed everything. Hope this helps.

i am building a set of control arms for it, and yes the spacer is where i will get the extra 2 inches, im not sure if i want 8 front 4 rear or 8 and 6, did you do anything with the track bar bracket ? i might modify mine depending on the angle of the dangle, if my control arms dont work out, then i will give tgc a call, 275 is a good price and i think that is with the bushings, i want to stay with 37s because i want full articulation and 37 inch tires usually have the highest load rating, i still plan on being able to daily drive and fourwheel and work with this truck, thanks for the info j. t.