How Long Should it Take??

[Dave Remillard]

I will be installing different injectors in my 95 Ram. How much time should I allow, and other than something to pull the old injectors, do I need special tools other than a torque wrench and sockets? I know mechanical aptitude comes into play, so lets just say I'm capable, just not having done this before, a little cautious. Thanks

 

[Koa Man]

I would say being careful and taking your time, shouldn't take longer than 4 hours for a first timer. That much time also includes time for a beer or two, cleaning up and putting away the tools.

 

[Cooker]

I'm with KOA.



4hrs and that includes a little BS'n around.

 

[HEMI®Dart]

Don't start the swap without a injector puller. You will probably need one if the stock injectors are still in there.



You will also need a 19mm or 3/4" crows foot to tighten the injection lines. Torque should be 22 lb-ft.