Engine/Transmission (1998.5 - 2002) How to display 24V codes ???

[d-iron]

I have 2002 and my son just bought a 2001. He just installed fuel pressuse gauge, and has 5psi and lower. I saw on TDR the code list and printed it out. I did not write down the instructions to get them to come up. Key cycle thing. I would like to check for codes (vp-44 damage) and for him it looks like lift pump time. On my 2002 with 69,000 mi it was lift pump about every 10,000mi. When warrenty was up I went to Edge /w attitude and AirDog.

 

[Gary - K7GLD]

Turn the ignition key from off to fully ON, but not far enough to engage the starter - do that 3 times fairly rapidly, and leave the key in the ON position on the last time - then watch the odometer window for the codes (if any) to read out - give it plenty of time to fully display until the normal odometer mileage reading returns. Have a pad and pencil ready to note any codes that might be displayed. The display will cycle thru 2 different modules - ECU and PCU as I recall...

 

[d-iron]

Thanks, I will give that a try. I will try to post what we find.