How to re-flash the TPS myself

[XcumminsX]

Hey guys. Ive been told my truck will jump around in gears alot in town because the TPS may have not been done at the factory. It was not too long ago i saw a thread stating that sonme of our trucks didnt even have the tps programmed... . Well does anyone know how to do this. . Do i unhook the battery cable for 15 minutes then hook them back up and slowly push the gas pedal all the way down slowly??



Nick

 

[FastEnough]

Here you go.

This procedure has shown to help 24 valve ISB engines. It is

basically

> teaching the fly by wire accelerator on these trucks to reread the

> position of the pedal and it's limits. Most complaints this will help

with

> is poor acceleration, improper shifting, bucking in 5 and 6 speeds.

Has

> been known to increase fuel mileage in some instances.

>

> 1. Set parking brake

> 2. Disconnect negative battery cables on both batteries

> 3. Turn ignition key to run(to drain any remaining capacitors)

> 4. Let truck sit for 30 minutes( this is the recommended minimum)

> 5. Return ignition to OFF position

> 6. Reconnect both batteries and secure, not a timed event

> 7. Turn key to run position(not start) and depress accelerator pedal

> slowly all the way to the floor

> 8. Allow pedal to return to top position slowly

> 9. Turn ignition switch OFF

> 10. Release parking brake

 

[XcumminsX]

Brent THANK YOU! I REALLY APPRECIATE IT.



Nick