Husky Floor Liner (center hump)

[Tony T.]

My 03 has the auto,but with the 4x4 I have the floor shifter. I also have the Husky floor liners an I can say for me I really like them. Husky does not offer a front center hump liner for the 4x4 floor shifter model, and I had been wondering if anyone has purchased the center hump liner for auto's an modified it to fit for floor shifters. Thanks for any replys or pics.

 

[CIverson]

I have seen pictures of the center hump liners in cabelas, and they seem to have a "ring" of non-diamond treaded rubber around where the shifter would go. If that's the case it should be easy to just cut out and toss in.

 

[Tony T.]

Originally posted by CIverson

I have seen pictures of the center hump liners in cabelas, and they seem to have a "ring" of non-diamond treaded rubber around where the shifter would go. If that's the case it should be easy to just cut out and toss in.

CIverson: you got my curiosity up, so I went an got the Cabelas master catalog an found the liner, and this would be perfect if I knew for sure it would fit flush once it is cut out for shifter. The advertisement says for vehicles "without the floor shifter", but thats what I like about the TDR, someone is always modifying something to fit. :-laf

 

[bmoeller]

Originally posted by CIverson

Ithey seem to have a "ring" of non-diamond treaded rubber around where the shifter would go. If that's the case it should be easy to just cut out and toss in.

That is what you do on the liners for the 2nd gens also. They cut easy.

 

[CIverson]

If your worried about the fitment, you could always try taking the shifter bezel out and then cutting the hole and trying to place the bezel back down over the liner, as long as it fits alright, then it would cover any cuts.

 

[RobertBolinger]

if unsure, try it!

Cabela's will take it back as long as it's resaleable-I returned some bedrails and they gave me a full refund, except shipping-so I had to pay shipping both ways is all...

 

[Tony T.]

Originally posted by CIverson

If your worried about the fitment, you could always try taking the shifter bezel out and then cutting the hole and trying to place the bezel back down over the liner, as long as it fits alright, then it would cover any cuts.

I have also considered doing it this way,an may go ahead an try it. Thanks to every one for your replies.

 

[R.M.THOMPSON]

I got my center cover from Cabelas,perfect fit. All I had to do is cut out the floor shift area inside of the molded border that came on the mat ! IMO it would look out of place in a truck with an electic t-case due to the molded border on the side of the mat !!

 

[Tony T.]

Originally posted by R. M. THOMPSON

I got my center cover from Cabelas,perfect fit. All I had to do is cut out the floor shift area inside of the molded border that came on the mat ! IMO it would look out of place in a truck with an electic t-case due to the molded border on the side of the mat !!

"I'm Sold" Thanks Robert!Oo.