Engine/Transmission (1998.5 - 2002) hx-35 hybrid ?

[LukeW]

im looking at gettin a different compressor housing and 60mm wheel from high tech turbo, (need to lower egts) just wondering if anybody else has this set-up and if they like it or not, and maybe who is competitive at pricing or other ideas you guys may have as long as there not to pricy

 

[OPoole]

What year is your truck? Gears and what mods.

 

[LukeW]

my truck is a 99 auto, with mods including edge juice, 4in strght pipe, ats manifold, 100hp edge jammer injectors, pusher pump, and AFE cold air intake. 4. 10 gears.

 

[jkidd]

I have a similar set up with mach 2 and a hybrid turbo and 14cm2 WG. With just the 110HP sticks and juice on 1x1 I just barely run out of air onl the HX35/40 at 35psi during WOT. On 3x3 it smokes about as bad as the stock turbo, stock injectors and 5x5 at WOT.



I tow with it on 1x1 and have smoke on demand. I have a small s300 I am going to try out.

 

[EricBu12]

I have Industrial Injections 35/40 and can push 35 psi and I tow with it. I need to get bigger injectors to push it to 40 but it does OK. . I have a edge and bluechip with 4" exhaust and Bosch stage 2 injectors... you will read lower on the top end but you might read higher on the lower and cruise.