Engine/Transmission (1998.5 - 2002) HX35 to elbow gasket

[Scheibins]

I'm going to swap out my HY for an HX soon and am trying get everything I'll need. Oil tube gasket, exh man to turbo gasket and the elbow gasket, I would think. The dealer can't find it and I don't see it sandwiched in there. Is there not a gasket there?

I don't need anything else besides some PB blaster right? I have a boost elbow and the correct oil drain tube. My current oil supply line will fit right?



Jay

 

[Scheibins]

Alright, there isn't one there. I just got off the phone with Cummins South.

 

[SRadke]

Nope, just a flange and a clamp



-Scott

 

[OPoole]

Yes there is a gasket. . turbo to elbow with 5 bolt holes cummins part# 3535001

 

[Joseph Donnelly]

That gasket goes between the turbo housing and the backplate. On 99-up HX35s, the backplaate and the elbow are one piece. On earlier turbos, there is no gasket between the two pieces--backplate and elbow.

 

[Scheibins]

Scott,

Clamp? I ain't got no stinkin clamp.

Opoole,

Thanks for the PN.

Joe,

Are you saying I DO need a gasket? You

said "earlier turbos don't need a gasket" and

I have a later model (than 99 anyway), so

I need one.



Thanks,

Jay

 

[Joseph Donnelly]

Depends on which HX35 you get. If it has a backplate on it with the round hole for the elbow, you won't need a gasket.