Here I am

Engine/Transmission (1998.5 - 2002) HX40 downpipe

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission Bilstein shock mounting

Engine/Transmission (1998.5 - 2002) Codes P-0123 & P-1597

Status
Not open for further replies.
Where’s the best place to get a HX40 down pipe? I have 4inch on my truck with a 4inch down pipe is there any place that I could just get the machined nipple that clamps on the back of the HX40 then I could use my old 4inch down pipe and just tig on the adapter.



Also are the turbos on the 3rd gens a 3 inch or 4 inch exhaust coming out the back I thought may be if it was 4inch I could put a 3rd gen e-brake on the HX40
 
diesel dynamics sells the flange. Keith was the only person from any of the big suppliers that helped me out on that one when I was in your shoes going to the HX40!!! just couldn't see spending $150 on a downpipe when all I needed was a flange!



hope this wasn't too late getting to ya! :(



Forrest
 
I have seen the flanges available at a couple sites on the internet. If I rememebr right it was around $30 or so. I will see if I can dig up a location if you are still in need of one.
 
Status
Not open for further replies.
Back
Top