Here I am

I debadged my truck and added this....

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

cab clearance lights

Blue Box and stumble

Status
Not open for further replies.
Here is another option some of you may not have seen

#ad

These are by NW Custom. There used to be a link on the TDR Page, but here it is:
www.omnicast.net/nwcustom
------------------
96 2500 4x4 Driftwood auto Waren 4x boards pyro,boost,trans temp on a piller mag hytec trans

[This message has been edited by TRACY MURPHY (edited 01-22-2001). ]
 
Group purchase sounds great if your friend is willing. I'll wait for your post before I make the call.

Thanks,

Scott W.
 
Tracy: Cool Decals!! Are those available? I think I'd like those! Did you make them yourself?

Debadged mine at 1 month old and the small stuff was easy. The 2500 Ram Cummins Turbo Diesel badge was a toughie. Used all manner of tool and chemical, including Goo Gone (I was cautious lest I mess up the paint... ).

Finally I went to a GOOD body shop and lo a behold they had a rubber flapper wheel made by 3M just to remove this residual glue! The owner had mercy on me and took the glue off in seconds and at no charge!

------------------
2001. 5 2500 SLT+, QC/LB 4x4, ETH, 6spd, 3:54 LSD, camper/tow equip. , NV241HD, Bright Silver, Snug Top, Ispro w/3 pod pillar w/tweeter, Pyro, Boost & Mag Hytec cover w/temp guage, "Plain Wrap" (no decals or emblems)
 
Hey Gary,

I have a 01. 5 also. Are the side plastic stickers and the small sport sticker by the rear window attached via tape? Do you just pull those suckers off also? I have removed the decals on the tailgate with little hassle but don't want to tear off the side pieces without some info... #ad
Thanks

I am in on the group purchase if it happens.


------------------
Mark Schlueter
2001, QC, 4x4, ETC, K&N, White sport package. Kodiak Sidewinder Steps (front and rear). Mag Hytec diff. cover. Wet Okole seat covers with Rams head logo. VDO Vision Gauges. Three hole "A" pillar mount from Geno's. Mag Hytec Trans pan on order.
 
gary those are awesome , i pulled my tailgate stickers 2 days after i took delievery , but the door badges are still on , if your friend will make them to sell then i'm losing the door badges .
 
If anybody is interested, I,m having a bunch of these made as we speak, so to speak... The initial set will be for a light colored truck, such as silver, white,etc. , but I can do any combo of colors you would need... . I,m also doing the word " TURBO " in fade from yellow to red for my truck, so I'll have extras of those,
Colin
 
GaryC

They all look good, but sticker free is the life for me.

Besides, nobody said all stealth bombers had to be black. They never know what passed'em. All they remember is that it was big and red, and LOUD. #ad



------------------
Y2K Red Stealth Sport 2500 4X4 QC SLT+, 5-spd, 3. 54 anti-spin, 265-75-16 LTX’s (There ain’t no such thing as options, cause ya gotta have it all, including: DC’s dead cow/vinyl interior and don’t stop anti-lock brakes. ) Stock, but not for long. Oops, too late. What silencer ring? (More fun than my 98 SST)
 
Gary C... any news on the gruop purchase yet. I don't know why I'm anxious as it's 15 F outside and I don't have a heated garage, or a non heated garage for that matter #ad


Scott W.
 
Mark the owner was deathly sick today so I will call him again tomorrow, they will be in the 20-25 range I think. Mark doesn't mess around, they will be perfect.

Thanks for all your guys interest and will get back to you tomorrow, I promise.

------------------
2001. 5 2500 QuadCab SLT, Auto, 3. 54 Anti-Spin Axle, 4X2, SWB, White/Tan. BOMBing shall commence, soon after breakin. www.ProwlerOnline.com
 
Anyone with problems of an outline being left after debadging the tailgate? I've seen trucks with no letters on the tailgate, but you can still see where the lettering used to be. Could this be because the lettering was not removed when the truck was new?
 
I had that problem when i pulled the stickers from mine. This helped. Cleaned the area good with Denatured Alcohol and then applied a coat of wax to the area. Still can see it every once in a while. going to buff the truck in the spring though and hope this helps to get rid of it totaly.

------------------
Daniel McKeehan
1999 2500 QC/Short Bed/4X4 5 speed. Camper Package and of course a Cummins.
 
Website for Cummins stickers

They are going to be 20 bucks a sticker, they are three color with brushed silver base with black and then Candy red for the turbo. These colors are the colors for the group purchase.
Please be in contact with them, I have done my part.

#ad




[This message has been edited by Gary C (edited 02-03-2001). ]
 
The "C" can be purchased from Cummins. It is about 2" x 2" and is made of aluminum. I shot it with 3 coats of clear coat to make it look better and for durability. I made the "ISB" part from a Cummins cabplate.
 
I will be going in to my friends shop to help design the 12 valve stickers.

Any Suggestions?????

Do you guys want "diesel" in there?

Cummins means diesel right??????????

I did the design for the Original sticker.
Do you want to trust my judgement?

The more you customize the sticker the more money you need to pay.

I think what we should do is have 3 stickers, one the way it is, a 12 valver and the high output(ETH?).

I am sure Mark will keep the price the same.

And if we all had the same look we could start our own sticker club. #ad


------------------
2001. 5 2500 QuadCab SLT, Auto, 3. 54 Anti-Spin Axle, 4X2, SWB, White/Tan. Debadged, Custom CUMMINS Logo sticker, gauges on there way with pillar mount, Front spoiler, sport tail lenses and the H3ll with the warranty, BOMBing shall commence. www.ProwlerOnline.com

[This message has been edited by Gary C (edited 01-27-2001). ]
 
Status
Not open for further replies.
Back
Top