Here I am

I officially have no life

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

RDusch has a Birthday

H1e

Status
Not open for further replies.
Well ladies and gentlmen. I have achieved my goal. You will all remember this as the day that CB finally reached (count 'em) 1000 posts.



I know all of you n00bies bow to my posting abilities and fingers of fury... but, ah... young grasshoppers, you too will someday become a zen master of posting as I have become.



Either that or I just don't have a life... I don't know which!



:-laf
 
Chris,



Check your PM box. With your serious post count padding, and my whining about the Nazis 'round here, we might oughta scat before the Pastor comes after us with a bigger stick. Oh well, we're still young; we can outrun him, at least on foot. ;) :D :cool:



Daniel
 
At least he didnt make a 5 digit count his next goal:rolleyes: In the interest of keeping this REMOTELY related to First Gens, how's yer project coming along? How is your financier, ah, uh..... umm. . I mean, girlfriend, doing? She going to stay by your side through the summer? ;) :cool:
 
Yeah, PB gets off of work in 10 minutes... quick... hide the BS!



:D



Yeah, my uh... top secret project is doing fine... .



Shhh!!! I think he's comming... :D
 
Hmmmm... ... ... me thinks he "Tasks Me"... .



Seriously guys, if it's not a bit more 1st Gen related please take it to the "other" forum or we could get "called to account" for not doing a better job on staying on topic.

I don't want to loose the "discretion" flexibility around here... .

CB, I'm gonna have to duct tape yer fingers together, then to your forehead ..... I've had to buy glasses cause of you... . ;):D



Pastor bob...
 
Ok, ok... uh... my truck is nice because it has a big engine compartment to work on and it goes vroom.



Is that close enough? :D
 
Originally posted by Paychk

Is it warming up? is spring on its way?... ... ... ... . no that is just CB's hot air! :cool:

Hmmm... ... . and my lack of intercooling has resulted in an unusual extension of fall and now a return to summer here. [goes back to JELONARD telling me in Dec to make plenty of heat & smoke and ship it east; it just stagnated here, much like everything else in the area] See Pastor? that was remotely First Gen related. :-laf



OK, BS-ing done for this week; I'm never gonna get to 1000, though I have no more life than some teenagers here. :rolleyes:



Edit, I beat him to 1500, though.
 
Last edited:
good. now maybe you can stop cluttering up the forum w/all this stupid bull I TRIED TO BY-PASS THE CUSSING FILTER it makes the whole 1st gen. forum looksilly. guests on the site would be more inclined to subscribe by not seeing all the immature crap thats been posted lately. "Seriously guys, if it's not a bit more 1st Gen related please take it to the "other" forum or we could get "called to account" for not doing a better job on staying on topic"







just what i think, wade
 
Wade, i understand what your saying but i think that's a little too harsh. The 1st Gen crowd is a little funny so you have to bear with us. BTW do you have any pics of your work, i'm very interested in it. PM me if you do.



Chris
 
At some point we here are all a little "off topic"... ..... OK then. Would you you buy "off our rockers?" It's what makes our forum a bit more unique!!

A bit more "care free" if you will. We don't have to be quite so stressed about our truck's and life as we know it 'cause the bank don't own our trucks.



I hope that makes some sense. Not stepping on the toes of the other generation trucks. Only expressing the opinion of the 1st gen forum as I see it.



See, that wasn't such a terrible thread.



Scott
 
... . Busted knuckles... ... ... ... ... ... ...

Scott,

If you ain't skinnin' up your knuckles... . you ain't fixin' nuthin'... . correction... ... . fixing implies that something's broken... .

replace fixing with "enhancing":p



Then again I once had a boss who's motto was... "If you ain't beakin' nuthin' you ain't learnin' nuthin'":D



There... I successfully re-directed this thread again.

Jay
 
Busted Knuckles...

I had always been told if y ou aint skinning your knuckles, you aint doing it right. Thank God I always get it doen right.

CB- was that kick in the nuts directed at my, or someone else's, smart alec post?



Daniel
 
Status
Not open for further replies.
Back
Top