Here I am

Engine/Transmission (1998.5 - 2002) I plugged the turbo at elbow

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission Body Lift Kit for 2nd Gen

Engine/Transmission (1998.5 - 2002) 24 valve power loss

Status
Not open for further replies.
I was using the elbow that came with the edge ez. I was having problems getting the boost past about 25 pounds. . I took the ez elbow out and put a plug in the hole of the turbo and completely took the wastegate loose. I can now push the boost up to 30 pounds with an exhaust temp of 1100 deg . My question is if I keep my boost to 30 lbs or less will my pluging the wastegate hurt anything...



Thanks

Ken
 
I have plugged mine several times, for extended periods. No adverse results. The stock HX-35 will run higher than 30psi without problem, but it will shorten the bearing life some, due to rpm.

Jeff
 
Status
Not open for further replies.
Back
Top