Here I am

2nd Gen Non-Engine/Transmission I would like to have the orange marker lights over the cab put in

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
dealer is your best bet. I think the kit usually costs about $85 - $90 plus about $150 in labor. At least that way it would have a warranty against leaks



JL
 
Vaughn, I'm sure you've seen them, but check these out. I've had em on two of my trucks and will be getting one soon for this truck. I've always gotten the lighted one, looks great lit up at night. Lund Visors
 
I bought the factory clearance lights from Mopar4Less and installed them myself. It was't too difficult. I'm very happy with them.
 
Last year I got some marker lights at Auto Zone L. E. Ds Look great. Instelation was easy (already had the cheapie looking Dodge lites after 7 years yuck) Made a template for driling new holes and making sure old holes were covered. Got some stainless sheet metal screws from Ace, #8, I think. Take a lite with you to Ace to make sure it just does bottom in the lites mounting hole, too large will jam in the lites mounting hole. They came with a really nice gasket. After I finished I went to get fuel and unexpectedly there came one of those Florida down pours. It came down in buckets Even with the wipers full blast had to stop, could not see. Got home looked at the head liner, no leaks, WHEW! Just under $14 each + tax. worth every penny to me, look great and probably wont ever need to replace. L. E. Ds last forever so I am told. -- email address removed --
 
Last edited by a moderator:
I thank I will look in to the led lights

as soon as I get the dakota digital fuel psi gauge put in

they only sent me the gauge and a sending unit

now I need to find the rest

what kind of bs is that

but thanks guys it will come together

vaughn

in west palm beach fl
 
Tramplineman, that link you have for the Lund Visors is almost double the price of getting the same visor from Summit...
 
IS THERE A WAY OF CLEANING HEADLIGHT LENSES? MINE ARE DULL AND DINGEY. THANKS. -- email address removed --
 
Last edited by a moderator:
J. BURCHFIELD said:
IS THERE A WAY OF CLEANING HEADLIGHT LENSES? MINE ARE DULL AND DINGEY. THANKS. -- email address removed --



Polishing or rubbing compound. My dad likes the hand cleaner with pumice in it, but I have never tried that. You can get plastic-specific polishes, but I just use the 3M rubbing compound for paint on mine. Works pretty good.



Chris
 
Last edited by a moderator:
I have a plastic store near me, and got some Novus, Fine Scratch Remover #2.

It is a polishing compound for hard plastics and it is GREAT! Cost me $3. 50, and I did my plastic with a washrag. Works good!
 
Katmandu said:
FYI... .



RED and BLUE lights ARE ILLEGAL if they are mounted on the FRONT or TOP



of any vehicle UNLESS it is an EMERGENCY VEHICLE !!





.



He said "LED" not "RED" :-laf



Scott
 
hey anyone w/ pics of 7 cab lights instead of the useal 5 i think this would look sweet especilly w/ some truck mirrors and some stacks
 
Status
Not open for further replies.
Back
Top