I'm back guys!! Oo. Let me tell ya. I had never seen an ice storm like this, not ever! I have environmentally friendly "wood heat"
so I was kept toasty, but not the same for others
Town folks lined up for hours waiting to purchase space heaters that had not even been delivered yet
"Most" everyone now has electric. Phones are still out though.....
To all you guys sending me PM's and asking quetions in your posts and via e-mail... please be patient as it may be some time untill I can get back to U all. I WILL respond in time. Tugboat, good thing you didn't head this way for your engine mods! We'd been work'n by candle light.
I had lots of time to study up on our 5. 9 Here are some interesting facts of KSB function on our VE pump.
Wax Motor style-Pre '91... ... ... .
160°F nornally open colant temp. switch
Open below 160 and closed above 160
Electrical Solenoid '91 and up... ... .
90°F normally closed manifold temp. switch
Closed below 90 and open above 90
Engine CPL 1579 no resistor
Engine CPL 1351 with 3 ohm resistor (mounted at rear corner of intake manifold cover.
The wax motor or the solenoid, control a pressure relief valve mounted across from the motor/valve in the KSB housing.
I have more specs but this is long enough.....
GL



"Most" everyone now has electric. Phones are still out though.....
To all you guys sending me PM's and asking quetions in your posts and via e-mail... please be patient as it may be some time untill I can get back to U all. I WILL respond in time. Tugboat, good thing you didn't head this way for your engine mods! We'd been work'n by candle light.
I had lots of time to study up on our 5. 9 Here are some interesting facts of KSB function on our VE pump.
Wax Motor style-Pre '91... ... ... .
160°F nornally open colant temp. switch
Open below 160 and closed above 160
Electrical Solenoid '91 and up... ... .
90°F normally closed manifold temp. switch
Closed below 90 and open above 90
Engine CPL 1579 no resistor
Engine CPL 1351 with 3 ohm resistor (mounted at rear corner of intake manifold cover.
The wax motor or the solenoid, control a pressure relief valve mounted across from the motor/valve in the KSB housing.
I have more specs but this is long enough.....
GL