Here I am

idle in gear

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Power Adjustment screw

SamsRams = "Mad Max"

Status
Not open for further replies.
ok now i have a idle problem... i have the throttle set where it idles fine in P or N but in D or R the thing idles down and dies and i tryed turnin the idle up higher but it still dies in gear. :{
 
sounds like you have a gov. problem, these ve's are supposed to maintain a set rpm and give more fuel to the engine with a load, even at idle.
 
it was fine before but now that i got done putting the 3200 spring in and gettin the AFC lever ground it has its problem... . power everywhere else is really good... feels like its got more power now than before even with the full fuel screw turned out some... had it all the way in before i put the-3200 spring in and gettin the AFC lever ground.
 
Last edited:
hmm yes I see... I put in the 3200 gov spring, but did not grind the afc lever. I know that the 3200 spring did not give me those results you are having, acutally it didn't really change anything at idle to speak of for me.
 
Status
Not open for further replies.
Back
Top