Here I am

Ignition on keyed power source for a 2016 3500

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Key Fob help

Possible slipping or loose feeling in first gear (2013 mega cab 68RFE)

Status
Not open for further replies.
Getting ready to install a Air Lift compressor for air bags on my 2016 3500 Laramie Longhorn. Want to tap off of a keyed ignition-on power source for the relay so that the compressor only runs when the ignition is turned on. Anyone know of a source that won't cause any problems with the ECM? No service or wiring manuals available yet for a 2016 that I can find.
 
I used the wire under the console that feeds the charger plug to switch a relay on my '13, don't know if that has changed or not.
Larry
 
For future reference, I ended up using a fuse tap on fuse F93 in the main fuse panel in the engine compartment. This fuse goes to the center console/cigarette lighter.
 
Status
Not open for further replies.
Back
Top