In a bind for a flywheel

[MikeR]

Do any of the 94-97 12 valvers that switched to a McCleod clutch have a flywheel sitting around collecting dust? I know I'm kinda doing this at the last minute,but my truck needs a clutch and I'm going on vacation in two and a half weeks. During the next two weeks I only have one day where I can do a clutch install and would like to have a flywheel ready to go because I'm doing this at night (too late at night for machine shop).
If you need a flywheel back because you're saving the old stock clutch,I can send you the one I'm taking out and machine it for you when I'm done.

-Mike

 

[bholcomb]

I have one if you need it, but hopefully someone who lives closer to you will volunteer. Email me if no one else comes forward.

Brian

[This message has been edited by bholcomb (edited 01-24-2001). ]

 

[Forrest]

Mike,

Just did it & I've got one. Pls send thru the addrs to my e-mail. #ad
#ad


------------------
Money Sink - 96, 5 speed, HX40-16, TST #11/280 slid 3/4 way, 300 HP Injectors, Scourge BD 4200rpm Governor kit, McLeod, 4", CATless, straight out back, chrome turn down, ISSPRO Pillar, Delvac 1 & Amsiol, K&N, Mag-Hytec, 3:54, Michelin 235s on Alcoas, Rancho 9000's, Valentine One.
#11 plate days are numbered, custom grind in hand.
Dutchmen 27' 5th Wheel.
GoldWing.

 

[Bob Wagner]

It makes me proud to see that TDR Members are always ready to help fellow Members

PS -Mike R. is a really nice guy and is always ready to help others! #ad

 

[Forrest]

Ok Mike, you're about to be the receptor of a 49 lb UPS regular ground box. #ad
#ad
#ad
I'd guess a couple of days may from Reno. Don't mind those burn marks. #ad
#ad

 

[Bob Wagner]

Great Job Forrest!

 

[gitchesum]

Man, you guys did such a great job helping Mike out, maybe you could give me a hand.



Piers has a clutch heading my way and I'd also like to have a resurfaced flywheel ready go in when I do the job. I will gladly pay for the wheel and shipping. Plus, I'll send my old one to you when I get it out if you'd like.



Post here or just shoot me and e-mail -- email address removed --

 

[Forrest]

gitchesum - just send me the shipping addrs & i'll hand truck it in to the UPS walk in.

 

[gitchesum]

Have I mentioned lately how much I love these guys on the TDR??



PM headed your way Forrest.



Thanks a million.

 

[RHARVEY]

This sounds like a start for a flywheel ship party. I also will be doing a clutch(when I not sure right now), and it would be nice to have the flywheel ready to go instead of being at the mercy of a machine shop.

Could I get on the list for a flywheel?? I too would have the old flywheel machined and ship it to the next person...



Thanks

Rick

 

[MikeR]

Wow, this is an old thread gitchesum had found. I got a few PM's last night from folks thinking I blew up my SBC clutch. I did not toast my clutch. If you look at the date you'll see my post is from over a year ago when I first was putting it in. Forrest, once again thank you!



-Mike

 

[RHARVEY]

Maybe I should look at the dates a little closer... Still interested in the flywheel though



Rick

 

[gitchesum]

Sorry about that Mike.

I did a search on flywheels and it came up. Didn't even notice the date. Figured I recycle it instead of starting a new one.



Good to hear your SouthBend is hummin right along cause that's what is on the way

 

[MikeR]

Curtis,



The flywheel that Forrest has is my old one, and I believe I machined it before I gave it back to him, so it should be ready to go.



-Mike

 

[gitchesum]

Too Cool!! Oo.



Dad know a machine shop that has a machine that'll put on a perfectly flat surface. I'll get my old one done and send it to who needs it first.

 

[South Bend Clutch]

Boy did you have me going. I know one of the PM's was from me.



Glad to here all is well.



Peter

 

[Forrest]

Hey gitchesum, It's boxed up, but I want to make sure I've got your addrs. I know you sent it & I read it, but I don't know if I put it away safely.



How bout e-mailing it to:



-- email address removed --



-- email address removed --



just to make sure. I can't believe how heavy these baby's are.

 

[Forrest]

Here it comes gitchesum. 50. 16lbs ... love to hear the UPS counter guy grunt.



1Z873X500316473644



If someone wants to rotate this thru your truck, have at it. If gitchesum doesn't mind forwarding it around the country that is. Last one, just ship it back to me.