Engine/Transmission (1998.5 - 2002) Industrial Injection ?

[Gregg Mig]

Im getting the bug for a little more power, but don't want to kill my milage, also I don't want exccessive smoke. I am thinking about putting in injectors from industrial injection, has anyone used these. they are expenssive. I been told that they are custom honed and the spray pattern is corrected so that it does not spray into the cylinder walls. Any comments? Gregg

 

[1965LONEWOLF]

i can say there turbo's are nice - just put one on and it's great - they make good stuff .

 

[rweis]

They are ONE of the very very very few rebuilders of the VP44 that will post information about the VP44 on these forums. Do a search and see which rebuilder post what.



I see it as they are willing to help, that is where I will get my next set of injectors or turbo or anything else, they will be the first call.



Bob Weis

 

[mclunas]

im a believer in them basically because of there good customer service. heck when i messaged brady on here he gave me his cell phone number and told me to call if i had questions during install. i give them two thumbs up!!!

 

[JDinterman]

I have nothing but great things to say about them,and the HRVP44 is one hell of a pump.

 

[Hendricks]

I personally dont have there injectors but the guys there are second to none. Im going to be ditching the jammers here soon and moving on to a set of there dragon flows. If Industrial sells it i would not hesitate one bit.

 

[Cummins724]

I have run their 3 flows [super clean], Dragon Flow 10 holes [not clean with box on or from a stop]. I just switched from the Dragon Flows to the 4 flows... . don't smoke without my box turned up. Brady really knows injectors... . all the sets I've tried have not smoked at idle & are very clean & smooth from idle to wot. You da man Brady!

 

[turbo torque]

I don't have II injectors but, recently bought a great turbo. Great people to deal with.

Like Hendricks said, " if Industrial sells it, I would not hesitate.

 

[Regcabguy]

Edge or VA

Look into an Edge EZ or VA box. Instant 65 rwhp and better mileage with only a few minutes work and low cost.

 

[16919]

Look into an Edge EZ or VA box. Instant 65 rwhp and better mileage with only a few minutes work and low cost.

That was kind of a jump... ... off topic??? I also agree that I. I. makes a top notch product.

 

[JacktheBear3]

Look into an Edge EZ or VA box. Instant 65 rwhp and better mileage with only a few minutes work and low cost.

Bozo the Clown... . ?

 

[hummincummins2]

Look into an Edge EZ or VA box. Instant 65 rwhp and better mileage with only a few minutes work and low cost.

hes already got an edge EZ

 

[NoSeeUm]

Call them up and ask for reccomendations. I you go to big with injectors you will need to upgrade your turbo.



Jim

 

[massdiesel]

You will be very happy with their stuff we have used it and sell it along with others

 

[onestackdram]

You should aslo check into F-1 Diesel's injectors. I have sold countless sets and have never had a single customer unhappy. I highly reccommend atleast checking them out. They are called the Mach series injectors. Made by TDR membe DonM.

 

[MarkMiller]

I don't have II injectors, i run Formula One sticks and an II phat 62. I like the turbo and the sticks and can't complain one bit about either. I don't believe II was selling injectors when I bought my turbo so I wouldn't have looked into them. I will say that I spoke with Don about what I was doing, what I wanted and what I used my truck for and have been very happy. I also spoke a lot and bought most of my stuff from Doug at Performance Diesel Warehouse in PA, on here he is Jetpilot.