Here I am

Engine/Transmission (1998.5 - 2002) Injector Install

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1994 - 1998) Cam gear retaining bolt

Status
Not open for further replies.
i am about ready for an injector install, i would like to do it myself if possable,i would appreciate those directions if someone has the time and dosant mind,,,thanks in advance..... petercar449@hotmail.com
 
patcarman said:
i am about ready for an injector install, i would like to do it myself if possable,i would appreciate those directions if someone has the time and dosant mind,,,thanks in advance..... petercar449@hotmail.com

Look at post #558 ;)



-Scott
 
Hey all hopefully some one with these instructions is on here cause I am in dire need of them... Am about to start this project... . my new injectors showed up today and I have no instructions... Thanx very much in advance.

-- email address removed --
 
Last edited by a moderator:
MGloeckler said:
Hey all hopefully some one with these instructions is on here cause I am in dire need of them... Am about to start this project... . my new injectors showed up today and I have no instructions... Thanx very much in advance.



In the mail :)



-Scott
 
Thanks I got mine





98 SilverQC 24v, edge comp, afe intake, spa gauges, suncoast transmission, 33BFG MT's, 5" straight Pipe
 
Last edited:
PatrickCampbell said:
So... Why can this info not be posted publicly?

It is copyrighted material. There is a link to them in post number 558 above. Click on it and download them. It's easy :)



-Scott
 
Please send

I did a search on this Can someone send me a copy to -- email address removed --



Thanks in advance.
 
Last edited by a moderator:
SRadke said:
I guess it's futile to refrence the link in post #558 so one more set in the mail. Good luck fellas.



-Scott



Worked for me. Saved a copy of them just a minute ago. Might help if you have a copy of Adobe Acrobat.
 
The link in post #558 doesn't work anymore because I no longer work at the University of Alaska Anchorage, and the new server admin removed my account on the web server.

Try this: http://www.tibor.org/DD-Injector-Install-Instructions.pdf

I've tried posting the updated link in the FAQ section, but I got a message that my post would have to be approved by the moderator before it would be visible. I think it's been over a week now and still hasn't shown up, so if one of the moderators reads this I'd appreciate it if you could take care of it.

Thanks,
Mike
 
Can I get a copy of instruction also -- email address removed -- Thank you mark
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top