Engine/Transmission (1998.5 - 2002) injector lines

[JKaps]

can someone tell me a good place to buy a set of stock size injector lines. i have at least one if not two cracked i think. the truck runs and starts fine but i have a strong diesel smell and the lines at the back of the injector pump are wet. any help would be greatly appreciated

 

[Sticks]

Verify that the lines are indeed cracked and not loose fittings or blown seal on the pump.

Get yourself a blacklight (party shop), clean and dry the suspected area with starting fluid or brake clean, and in a dark area (garage with the lights out, thick tarp over the hood, or at night) start the engine and light up the area with the black light. The leaking fuel will show. DO NOT RUN YOUR HANDS OVER THE LINES WHILE ENGINE IS RUNNING!!!

Otherwise Craigslist, Ebay, or junkyard for used, dealer or Cummins for new.

 

[blacksheepdiesel]

Make sure that all the hold down clamps for the lines are in place and tight, they are there for a reason.

Godspeed,
Trent

 

[JKaps]

thanks for the replies, i checked the fittings already i'll check the clamps

 

[JKreiss]

last i looked you could get a complete set from Scheids. Might as well do em all anyway.

 

[SNiebaum]

can someone tell me a good place to buy a set of stock size injector lines. i have at least one if not two cracked i think. the truck runs and starts fine but i have a strong diesel smell and the lines at the back of the injector pump are wet. any help would be greatly appreciated

my brother has a complete set that we just took off of my truck when we did a P7100 conversion... . he's over in Louisburg. Send me a PM and I can get you his information... .

 

[JKaps]

thanks to everyones help i got a set of used lines

 

[SNiebaum]

thanks to everyones help i got a set of used lines

hope they help you out... .



if you need any extra performance parts, I have a few left over from my conversion... .