Injector Sizes

[tomblue01]

Since I'm in the market for some new injectors, I put together this list to help me compare all the variations out there. These are not flow rates, but rather the total area of the injector holes in square inches.
These numbers come from pi*r^2*(number of holes).
Stock = 5 x .010

 

[Joe Mc]

If you aren't looking for power increase the closest to stock should be best bet. Some folks highly recommend the RV275 sticks. If you plan on increasing power don't forget that more fuel will need more air = bigger turbo, then can your clutch handle that? It's a slippery slope...

 

[BigPapa]

He has a 12 valve, Joe.

I can’t remember when or where I ran across this but it’s been saved on my computer since 2013.

 

[tomblue01]

"It's a slippery slope..." Yes, indeed!

I plan on a modest increase in power. 350-400hp. With all the options out there, I couldn't make much sense of the sizes until after sorting them out.

Thanks, guys.

 

[Joe Mc]

Didn't realize 12v sticks differ from 24v. Learn something new every day. Thanks.