Injector Tube Puller

[BIG BOB]

I'm getting things ready to install my injectors and I need to know where I can get an Injector Tube Puller. How about it, anyone know?

------------------
#ad
<font color=red><font size=+1>Big Bob</font></font>
<font color=blue>"WHITE OBSESSION" 99 Quad Cab, White, SLT, 4x4, 5-sp, 3:54's, Raven cap (cab high), Rhino liner, Stainless Nerf Bars, Stainless Rocker Panels, Tow package, Pro-flap mud flaps with Stainless Cummins "C" add to rear flaps, Valentine One, Uniden PC78LTW CB, Hadley Bully Air Horns, HOT Power Edge, Psychotty Air Induction, Braided SS Fuel Lines, 4" Jardine Exhaust (Love the deep throaty sound), 285/75R16 Cooper A/T's, Navigator 55w backup lights. </font>

<A HREF="http://albums.photopoint.com/j/AlbumIndex?u=1086000&a=9265455" TARGET=_blank><font color=red>My 99 Dodge Cummins</A></font>
<A HREF="http://albums.photopoint.com/j/AlbumIndex?u=1086000&a=9815423" TARGET=_blank><font color=green>BD Dyno Days 10/28/00</A></font>

<font color=purple>
Things to come; The clutch has let me know it is going to need attention very soon!
Pyro, 50# Boost and Fuel Pressure gauges (have Ultra lites will install shortly), PE EZ timing module and injectors (have Bully Dog step III injectors just need to install them), have 2 KC Daylighters (Stainless with 385,000 candlepower each), have 2 KC Fog lamps(Stainless 100w each) and waiting for Bar II Stainless Brush Guard to arrive, then will mount guard and lights.

NRA Life Member! (Need to protect our rights and FREEDOM!!)<font size=-2>


[This message has been edited by BIG BOB (edited 01-06-2001). ]

 

[Old Account - 243]

You don't have to buy or make anything. Screw a valve cover bolt into the top of the injector then take a small length of 1x2 or similar piece of wood and lay it across the top of the adjacent lifters. Take a 9/16" or similar size wrench and pry up against the bolt with the open end.

TXRam and I pulled the injectors out with the valve cover bolt by hand in many cases.

I just reread your post. If you want to pull the injector tubes, use a small screw driver to gently pry the injector tube outs. By small, I mean the smallest Craftsman screwdriver. Hope this helps.

243

------------------
99 QC 2500 ST 4X4 SB 24V/5speed 3. 54/LSD Driftwood/Agate
Walker 21468, VDO, Bridgestone 285/75/16 MT's, RS9000's, Hella 500's

-- email address removed --

[This message has been edited by 243 (edited 01-05-2001). ]

 

[BV]

http://www.spxmiller.com/
I don't remember the pn but the price was under $10.

 

[Big MAK]

Use a 23mm Deep Well Socket, manifold bolt dropped thru wrachet end, screw down bolt and injector lifts into socket sweet as can be. Works perfect and you aren't applying force to anywhere else in/on the engine.

 

[Vaughn MacKenzie]

Bob, I would do what big MAK suggests to pull injectors, because your truck is 3 years old and is probably pushing 75-80K so those injectors will not come out easily. They were a bear on my '98 just trying to remove them by pulling up on them.

Vaughn

 

[Fred Swanson]

BIG BOB, to pull the injector tubes, pull the fuel lines back, and use a small pocket screwdriver, and lightly pull on the end of the tube, you'll see some partial threads. It comes out fairly easy. Pull it back about an inch.
Nothing to it. Then do as others have said in this post to pull the injectors.

Takes a couple of hours.

------------------
Fred Swanson
Co-Owner
Canyon State Components, LLC
www.canyonstatecomponents.com

'00 QC,SB,4x4,Auto,3. 54 w/LSD,Trailer Package, Tow Package, DTT's VB & TC

 

[Mad Max]

Thx for the link BV... I honestly never thought to look for those guys on line.

DOH!

Max

 

[BIG BOB]

SPX has a NEW kit made by OTC. The part # is 6069. However you cannot buy it through SPX unless you have an account with them. Retail is about $45. 00. They referred me to NAPA and Car Quest. NAPA has to order it but the cost is under $30. 00. It is an injector puller and a tube puller. Here is a picture of it;

#ad


Here also is a link.

<A HREF="http://www.otctools.com/wnauto.php3" TARGET=_blank><font color=red>Cummins Diesel Fuel Injector Removal Kit</A></font>







[This message has been edited by BIG BOB (edited 01-06-2001). ]