Engine/Transmission (1994 - 1998) Injector washer part number needed

[DPinkston]

I just scored what is supposed to be a low mileage (<1000 miles) set of 215 injectors off eBay. I have searched here and dodgeram.org but cannot find the part number for the washers that go under the injectors. I understand that I can reuse my old ones, but I'd like to have a new set handy just in case I need them. I'm gonna order a prefilter/heater repair kit from Cummins and thought I'd add the washers to the order.

Danny

 

[DPinkston]

Never mind. I called Cummins and told them what I needed and they said no problem, they are in stock and will ship right out. I'll post the part number when I receive them.

Danny

 

[Vaughn MacKenzie]

If you call Piers they can send an injector service kit with several thicknesses of washers plus the return line washer pieces.



Vaughn

 

[DPinkston]

If you call Piers they can send an injector service kit with several thicknesses of washers plus the return line washer pieces.



Vaughn

Return line washer pieces? Is this something that I would have a good chance of needing? Never changed injectors before. If so I can order it the kit. Wanna have everything I might need before commencing.

Danny

 

[Vaughn MacKenzie]

I have reused them without too much trouble so you should be fine. You'll know what I'm talking about when you start taking it apart. . . the small tube joining all the injectors and going back to the filter has washer pieces where it connects to each injector.



Another thing nice to have is the rubber O-rings that go in the top of the nut that retains the injector, it keeps water & fuel from going down the space between the injector body and bore. I never had these before until I just put injectors in this Sunday.



Vaughn

 

[DPinkston]

I called Piers and ordered the installation kit. Better to have it and not need it than need it and not have it, especially since it's just $15 (+shipping).

Danny