Injector wiring help

[Doug1810]

I pulled the wiring harness on my injectors to have the injectors cleaned . I put them in and now the truck wont start i think i may have got them hooked wrong . There are 3 one short one med one long and ideas on there location . Next time i will get the camera out before i start . Thanks doug

 

[sag2]

This is the best photo I have. Not sure it will help.

 

[sag2]

The better chance is the connector tubes are not sealing. The injector wiring is fairly straight forward. Search for my post "injector replace with photos" for some more info.

 

[Doug1810]

Thanks . I will try the tubes . I think i have the plugs wrong it looks like there are only two ways they can go and see if it works .

 

[Joseph Donnelly]

Yellow or brown wire goes to the injector post closer to the intake (short) rocker. Orange or red wire goes to the injector post close to the exhaust (long) rocker.