Injectors 4 a friend

[ASHughes]

I'm not up to speed on the 24's , but a buddy of mine has an 04' 6 six speed with the 600 in it and would like to know what injectors would work best with his set-up without having to run an aux. feul system. The only mods. he has at this time are:cold air intake(brute force I think),MBRP cat back exhaust, and the edge juice tuner w/ attitude adjuster. He just wants to go fast , he'll never tow anything bigger than a 4-wheeler. Whatcha think.

 

[mberry]

I think he better start with the turbo rather than injectors.

 

[Tomeygun]

I think he better start with the turbo rather than injectors.

I second that, And a transmission upgrade too...



The Juice/EZ stack should be good for 450-500 with turbo, then see if he still want the injectors done

 

[mberry]

Where are my manners!? Welcome to the TDR ASHughes!



Tom, he has a 6 speed. Just needs a clutch. :-laf :-laf :-laf

 

[mattymac]

Juice attitude, Edge EZ, Good turbo and transmission upgrade will yeild upper 400's. If he wants to break 500 he will need a set of Don M's EDM injectors. They arent quite ready yet for the 600's but they have been out for the 555 and under motors with awesome results.



BTW www.f1diesel.com

 

[ASHughes]

Thanks. I'll pass this on to him.

 

[ASHughes]

He said a turbo sounds good to him. Do you guys think an HX40 or a B1 would do the job?He's going to want something thats pretty much bolt-in and dosn't want to spend 4k on twins.

 

[Got Smoke?]

He said a turbo sounds good to him. Do you guys think an HX40 or a B1 would do the job?He's going to want something thats pretty much bolt-in and dosn't want to spend 4k on twins.

Contact JWilliams3 he has a B1-04 and love its. He's running quite a bit of programming (488HP) and it doesn't smoke one bit!

 

[mattymac]

B1-04 or an HTB2 killer 64 or sledpuller 66 from High Tech Turbo. They are both pretty much a drop in turbo for the manual trucks.

 

[ASHughes]

Dose anyone else have any incite

 

[Tomeygun]

Dose anyone else have any incite

I heard paul at HTT will be making the HTB line of turbos with an intergrated 90 elbow to accomidate the 3rd gen user (until now, we had to use an adapter) - So more similai to the 3rd gen B1 outlet



I would call and ask, though, I heard this from another member

 

[Scrappy]

I have the B1-04 in mine and like it alot! I have the TST and the turbo cleared up alot of my smoke but it still does a little. it spools nearly as well as the stocker(close enough that I can't feel a difference) and gave me a nice power increase but I haven't had a chance to dyno it yet. your friend needs to do the fuel system upgrade also, I'll bet that he is already dropping fuel pressure @ WOT.