input,input

[RSeymon]

Need groups input on which way to go.



I'm going to install BHAF,new belt and new rad hoses. I use my truck mainly for a Rv,have a 11 1/2 foot slide in camper that weighs around 4,000 lbs. loaded.



Want to Install Bosch 190 injectors, but after that need some input from group on which way to go.



1. PDR trubo hx35 ?



2. new exhust But which one?



3. anyone install banks stinger package (new 14* turbo, exhust system KandN air filter) package system.



What you all say?



Thanks in advance

 

[bgilbert]

Ron, pass on the Banks kit, all you get is a 14cm exhaust housing, not a turbo. Can't go wrong with a PDR35, along with a 16cm exhaust housing with it. I've heard Rip has an exhaust kit for 1st gens, that is if you don't want to piece together your own 4"kit. Is your old exhaust about shot? For what you're doing, you'll be fine with the stock 3". OR you can go cheap and just buy the 16cm exhaust housing for your stock turbo and that will be an upgrade. One way or another you'll want that 16, be it now or later.

 

[RSeymon]

input

Bill thanks for the reply



1. my exhust is in good working order



2. If I understand the pers hx35 is what I need or is there another housing that I need?



Ron