Installed injectors today runs bad

[Deerezilla]

I Got a set of injectors from f1 on friday I tryed to install them. It started fine iddle great for about 1 min then it started to iddle ruff and lots of white smoke. Any ideas what it could be?

 

[38146]

I would check all the injector connections and check your common rail fittings for a start. Dan H

 

[Deerezilla]

took every thing back off retorque every thing and same bad idle and lots of white smoke

 

[JRamirez]

What did F1 say? Sounds like a fuel leak.

 

[Deerezilla]

send them back in. Ok how do you figure a fuel leak? Not my first set of injectors i have changed. I did every thing like is should be then took it apart and did it again. I have a inch and a ft pounds torque wrench I did the injectors down to 89 in and the tubes to 37lbs and 22 lbs for the lines . I heard the snap of the injectors and the balls up in the tubs and had the snap then to.



I'm thinking I got a pice of dirt or something and one not running right now

 

[Deerezilla]

Just got the call nothing wrong with the injectors.

 

[JRamirez]

If it ain't the arrow it has to be the indian... .



If you get in to Boise very often go see Pat at Big Twin Diesel in Meridian. I am guessing connector tube... .