Attention: TDR Forum Junkies 
Installed New Gauges
Hey All,
I recently had a set of three ISOPRO gauges installed, "pillar mount. " The Trany Temp reading is coming from the hot line going from the transmission to the cooler. I am using the line adapter that was sent with the kit. At 70mph, outside air temp of 95deg's it is reading 160deg F. When in stop and go traffic it ranges from 160degs to 190degs. When at idle, it stabilizes at 205deg F.
The Boot sits around 10-12psi at 70mph and hits just over 30psi when I accelerate from a stop to 2200-2500 RPM's
I had the pyro installed post trubo it stabilizes at 550 degs at 70mph. the pyro temp sits at 300degs when it is at idle. I was surprised how fast the temp comes down. It only takes about 30 sec to 1 min to reach 325degs after I come to a stop.
Just sharing some data for those that might have some questions about temps.
Hey All,
I recently had a set of three ISOPRO gauges installed, "pillar mount. " The Trany Temp reading is coming from the hot line going from the transmission to the cooler. I am using the line adapter that was sent with the kit. At 70mph, outside air temp of 95deg's it is reading 160deg F. When in stop and go traffic it ranges from 160degs to 190degs. When at idle, it stabilizes at 205deg F.
The Boot sits around 10-12psi at 70mph and hits just over 30psi when I accelerate from a stop to 2200-2500 RPM's
I had the pyro installed post trubo it stabilizes at 550 degs at 70mph. the pyro temp sits at 300degs when it is at idle. I was surprised how fast the temp comes down. It only takes about 30 sec to 1 min to reach 325degs after I come to a stop.
Just sharing some data for those that might have some questions about temps.
Last edited:
