Installing BD Pressureloc

[Simon]

I am getting ready to install a BD pressureloc. Looking for tips from anyone that has installed one.

------------------
96 2500 SLT auto. 4X4, Banks Stinger Plus, Gear Vender Over and Under Drive, Pac Brake, Aero tanks tool box, Pioneer CD player, 700 watt vortex amp, 2 6x9 Infinity 3 way speakers, 2 Infinity 2 way speakers, 2 tweeters and a 8" Punch sub woofer, Fiber glass running boards and wheel flares, Pressureloc with mystery switch and NO KITTY.

 

[nwohsy]

I just installed the pressure loc this past weekend and it went rather smooth considering i started at 9:30 pm with very little light and a constant mist / drizzle. first thing you will need is a pressure guage to test before and after line pressure. i picked one up at a local car quest for $33. 00 including numerous line fittings. the directions are pretty straight forward, the only problem i encountered was the lack of vacuum hook up on the firewall. the instructions said to use an available unused line of which there were none. a simple fix the next day where i just switched in an addition fitting, but at 11:30 at night it was very annoying because i had to wait until morning to road test. the instructions said i should be running 80-85 psi after it was installed but i couldn't get the pressure below 90 psi. after i unscrewed the rod all the way out several times after trying to make the adjustment i gave up and left it at 90 psi. i've encountered no problems and the transmission is shifting fine.